Technics SC-EH560 - Manual (Page 14)

Basic operations
RQT5355
14
DISC PRGM
H
AV EFFECT
SLEEP
CH SELECT
PROGRAM
1 2 3
4 5 6
7 8 9 0
j /-/--
CANCEL
DISC
VCR/AUX/
6CH INPUT TAPE/
DECK 1/2
U PRO LOGIC DIGITAL
S.WOOFER
SUPER
SURROUND
TUNER/
BAND
⁄ / g ¤ ¤ »
MUTING M N
∂ VOLUME µ
CD
TEST
3D AI EQ/M.EQ BAND
EQ
2
1
3
4
5
A
PROGRAM
1 2 3
4 5 6
7 8 9 0
j /-/--
¤
1 2 3
4 5
DISC
PROGRAM CANCEL
»
PRGM DISC
DISC PRGM
DISC PRGM
DISC PRGM
SC-EH760
SC-EH760
M , N
H
AV EFFECT
SLEEP
CH SELECT
PROGRAM
1 2 3
4 5 6
7 8 9 0
j /-/--
CANCEL
DISC
VCR/AUX/
6CH INPUT TAPE/
DECK 1/2
U PRO LOGIC DIGITAL
S.WOOFER
SUPER
SURROUND
TUNER/
BAND
⁄ / g ¤ ¤ »
MUTING M N
∂ VOLUME µ
CD
TEST
3D AI EQ/M.EQ BAND
EQ
1
2
CD
3
4
5
CDs
Program play
Select up to 24 tracks to play in the order you choose.
Remote control only
Preparation: Press [CD] to put the unit in CD mode.
1
Press [PROGRAM].
2
[SC-EH760]
Press [DISC].
3
[SC-EH760]
Within 10 seconds or so
Press [1]–[5] to select the disc.
4
Select the track with the numbered
buttons.
For tracks numbered 10 and over, press [ L ] then the two
digits.
Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560)
to program the tracks in the required order.
The total playing time of the programmed tracks is displayed.
5
Press [
1
].
All the tracks are played in the selected order.
[A] To cancel
Press [PROGRAM].
“CLEAR” is displayed and all the tracks are canceled. If a track was
playing, play continues to the end of the disc.
“FULL” is displayed
If 24 tracks have been programmed.
“– –:– –” is displayed if;
³ total playing time for the tracks is over 99 minutes and 59 seconds.
³ a track numbered 25 or over was programmed.
³ a disc not in playing position was programmed (SC-EH760).
Tracks can still be programmed and played.
[A] To check the contents of the program
1 Press [CANCEL]. “CANCEL” will light.
2 Press [ 4 ] or [ 5 ]. Each time you press the button,
the disc numbers (SC-EH760), track numbers and program posi-
tions are displayed.
3 After the playing time appears on the display, press [CANCEL].
“CANCEL” goes out.
To add to the end of the program
Repeat steps 2 through 4 (SC-EH760) or step 4 (SC-EH560).
[A] To cancel tracks
To program the track you are listening to
Press [PROGRAM]. The program mode engages and the current
track is automatically recorded as program No. 1.
1. Press [CANCEL].
2. Select the track with [
4 ] or
[ 5 ] then press [CANCEL].
3. Press [CANCEL] again.
Press [PROGRAM] or [ º ] while stopped.
A particular track
All tracks
Programmed
track no.
Programmed
order
Total playing time