Toshiba IPT - Manual (Page 34)

Advanced Operation
Soft Keys
20
Strata CTX DKT/IPT Telephone 10/03
Soft Keys
When Soft Keys are on, they replace the functions on the
0RGH
,
3DJH
,
6FUROO
and
)HDWXUH buttons below the LCD. ( )HDWXUH is a future feature for DKT3000-series
phones and the IPT1020-SD.) The following table defines Soft Key Prompts.
Table 1 Soft Key Prompts
Soft Key Definition
ABR Activates Automatic Busy Redial after dialing a busy outside telephone number.
ACB
Activates Automatic Callback after reaching a busy station, CO line, or CO Line
group.
BUSY (Busy Override) Sends a call-waiting tone to a busy station.
CONF Initiates or completes a conference.
EXEC (Executive Override) Breaks into the conversation of a busy called station.
EXIT Exits you from a conference; remaining parties are connected.
JOIN Joins all parties to a conference while on a conference call.
LINE
Adds a CO line to an existing call while in the Conference mode. The LCD prompts
you to access a CO line after you press this key.
MESG Sets a message waiting indication at a busy or unanswered station.
OVRD Overrides options, busy mode, or overrides Do Not Disturb mode.
PGE Enables you to enter a Page Group number (01~16).
RING Makes a called station ring when making a voice announce call to the station.
RLS Disconnects a call and returns telephone to the idle state.
RTRN Terminates a feature operation and to return to a previously displayed state.
STA.
Adds a station to an existing call while in the Conference mode. The LCD prompts
you to dial a station number after you press this key.
TALK Makes a voice announcement to a called station that is ringing.
TRNS
Initiates or completes a Transfer while on an outside call. Press once for an
immediate or announced transfer, depending on system programming. Pressing
TRNS again completes the transfer.