Texas Instruments Extensa 600 Series - Manual (Page 30)

Using PC Cards
2-9
In Windows for Workgroups
Windows for Workgroups beeps to indicate it has
detected the card. If a driver for the PC card has
already been loaded, you can use the card
immediately. If a driver has not been loaded,
you must manually load the driver. Windows for
Workgroups does not ask you to load a driver.
Ejecting PC Cards
Eject buttons are located beside each PC card
slot. Pressing an eject button ejects the PC Card
from the slot. To eject a Type III card, press both
eject buttons.
The eject buttons fold out of the way when a PC
card is inserted in the slot. To eject the card,
flip out the corresponding eject button, and
press in on the eject button.
PC Card Eject Buttons
PC Card
Eject Buttons