Timer recording – Toshiba MW24FP1 User Manual

Page 40

Advertising
background image

40

Recording (VCR)

Timer recording

Timer recording can be programmed on-screen with the remote control.
The built-in timer allows automatic unattended recording of up to 8
programs within 1 month.

Timer recording

Notes:
• Press to move cursor backward

for correction.

• To record from external source set

the channel to “L1” or “L2”.

Notes:
• The VCR section cannot be used while the TIMER REC in-

dicator is lit. If you want to use the VCR operation,press both
TIMER REC buttons at the same time to deactivate the timer.

• When the clock is not set, you cannot select “TIMER REC”.

In this case, set the clock (see pages 19~21).

• After a power failure or disconnection of the power plug,all

programmed recording setting and time display will be lost
upon resumption of power. In this case, reset the clock (see
pages 19~21) and reprogram any timer recordings.

• If you want to correct the digits while setting, press or

until the item you want to correct, then press

or

to

correct the desired setting.

• If programming is performed without a tape in the unit, or

with a tape without an erase prevention tab, the Timer Re-
cording is not possible. If a tape without an erase prevention
tab is in the unit, the tape will be ejected.

Press MENU, then press

or

to select

option.

Preparation:

• Press TV/VCR to select the TV/VCR mode.
• Load a cassette tape with the erase prevention tab

intact.

• Check the time and date are correct

21

.

Example:
Program a timer recording for 23rd day, channel 125
(Cable TV), 7:00 - 9:30 PM (Tape speed : SLP).

1

Press or to select one of the program line,
then press ENTER.

3

Press

or

to select the date, then press .

4

Set the start time, end time, channel and tape
speed as in step 4.
Then press ENTER.

5

To set the timer for another program, repeat
steps 3 to 5 to set another program.

6

Press both TIMER REC at the same time. The
TIMER REC indicator will light. The Timer is
programed, when the programed time is
reached, the recording is automatically
started.

To cancel timer recording, press
both the buttons again and TIMER
REC indicator will go out.

7

/ / / / ENTER/MENU

TIMER REC SET

DATE

2 3(THU)

START

7:0 0PM

END

9:3 0PM

CH

125

SPEED

SLP

SETUP

MENU

TIMER

REC

TV/VCR

MENU

ENTER

ENTER

TIMER REC

Press or to select “TIMER REC SET”, then
press

.

2

ENTER

ENTER

TIMER REC SET
AUTO REPEAT

/

/

/

/ MENU

OFF

/ / / / MENU

S P

TIMER REC SET

DATE

2 3(THU)

START

8:3 0AM

END

Р Р:Р Р

CH

0 1 2

SPEED

ENTER

ENTER

TIMER REC

/ / / MENU

OFF

TIMER REC SET

AUTO REPEAT

2 3 T H 7 : 0 0 P M 9 : 3 0 P M 1 2 5 S L P

/ / ENTER/CANCEL/MENU

5L00201C [E]p38-41

20/4/04, 16:07

40

Advertising
This manual is related to the following products: