Triax STR 333 - Manual (Page 5)

1. STAND BY To switch between operation and stand by
mode.
2. A.L/R To select the sound mode. (Mono, Left,
Right, Stereo) To display the reserved list.
(Option)
3. A/LANG To select the audio language.
4. PIP
ON/OFF To turn the PIP screen on/off.
CH To change the PIP screen channel.
If you press the button, the PIP Channel List
will be shown.
SWAP To swap the main screen for the PIP screen.
MODE To change or modify the size or location of
the PIP.
5. Multichannel button
Multi video pop-up window will appear.
6. INPUT Selection of external input. (Option)
7. TV/RADIO To switch between TV and Radio.
8. TEXT To see the teletext by OSD. (Option)
9. RECALL To return to the previous channel.
10. TV/STB To switch between TV and STB receive mode.
11. MENU To display the Main Menu on the screen or
return to the previous menu.
12. EXIT To return the normal viewing mode from a
menu.
13. PAUSE To pause or play video.
14. MUTE To enable or disable audio.
15. GUIDE To display the TV/RADIO program guide.
16. Progress bar To display the book mark banner.
17. CHANNEL UP/DOWN
To change channel up and down.
18. VOLUME UP/DOWN
To increase or decrease the volume.
19. Up/Down To move up or down on the menu.
20. Left/Right To move left or right on the menu.
To increase or decrease the volume.
21. OK To confirm your choice.
22. Record Saves the current channel to the HDD.
23. Stop Used for stopping play.
24. Recorded List
To open the File List screen.
25. Rew Used for rewinding.
26. FF Used for fast-forwarding.
27. Play/Pause Used for playing or pausing files.
28. Quick Replay To go to the previous screen.
29. Quick Forward To go to the next screen.
30. Slow Used for viewing the screen in slow
motion.
31. SUB-T(Red) To enable or disable subtitle or
change the channel list mode.
32. SORT(Green) To sort channel list.
33. ZOOM(Yellow) Enlarge the current picture.
34. INFO(Blue) To display the information box on the
screen.
35. NUMERIC BUTTONS
To select the channel and enter
the channel edit and PIN code.
36. DISPLAY To open the Display screen of the System
Setting menu.
37. TUNER To switch between Terrestrial and Satellite
mode. (Only COMBO)
Note
• When inserting batteries, make sure that the polarity (+/-) is
correct.
• The design of the Remote Control Unit may be changed
without any notice in advance.
1.1 Remote Control Unit
1. Functions and Installation
1
4
7
15
17
22
19
25
27
30
31
3
9
10
13
20
37
18
29
26
34
23
33
21
5
6
35
8
11
12
2
16
14
24
28
32
36
5