Technicolor - Thomson MS6000 - Manual (Page 14)

9
CD and mp3 Playback
EN
CD Display
(For Audio CDs only)
Press CD INFO on the main unit or CD INFO/ FM ST
on the remote control to select among different CD
display options: Track remaining time, Track elapsed
time, disc remaining time or disc elapsed time.
Setting Up a CD Program
(For Audio CDs only)
Note: The unit supports single CD programming only.
You can program the CD player to play up to any 32
tracks on the normal audio CDs in the tray.
1. While the CD player is stopped, press PROG•SET
to enter program mode.
The system displays the next available program
number: “- - P:01,” with “- -” flashing, prompts
you for the first track in the program list.
2. Press SKIP BACKWARD / SKIP FORWARD
to select a track.
3. Immediately press PROG•SET to assign the
selected track to the program number. After 3
seconds, you are prompted for the next track in
the program list.
(In CD program mode, PROG icon will be lit.)
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE .
Displaying the Program List
1. While the CD player is stopped, press PROG•SET
to enter PROGRAM mode.
2. Press PROG•SET repeatedly to list each track
assignment in the program list.
Deleting Program List
While in program mode, press and hold STOP for
3 seconds. The system displays the message CLEAR.
Tips:
• You can create a program of up to 32 tracks.
Caution: Do not push to force closing of the tray
during CD playback or tray opening.
MS6000 EN 4/2/03 3:14 PM Page 14