Top Innovations CF-980 - Manual (Page 10)

10 Top Innovations, Inc.
U
SING THE
C
ENTURION TM
VACUUMING
1) Make sure main unit, removable water tank, and cradle car are fully
assembled (see directions on pages 7 and 8 of this manual for assistance),
and ensure that Locking Handle is securely in place.
2) Connect hose to main unit. Connect Telescopic Extension Tube to Main
Siphon. Connect desired attachment (Floor Brush, Upholstery Tool, Crevice
Tool) to Telescopic Extension Tube.
3) Plug Grounded Power Cord into a convenient three-prong electrical
outlet.
4) Press On/Off Switch once to activate unit. You are now free to begin
vacuuming.
5) Suction power of vacuum can be controlled by setting Suction Power
Control switch to either high or low setting. High setting is recommended as
default setting, but you may find low setting is more effective in certain
situations (such as vacuuming especially delicate drapes and upholstery).
NOTE: Suction power may also be adjusted using control switch on
Main Siphon. See “Main Siphon” section on page 11 of this manual for
more details.
6) Once vacuuming task is completed, press On/Off Switch once to
deactivate unit. Immediately unplug Grounded Power Cord from electrical
outlet.
7) Refer to Proper Storage section on page 12 of this manual for
information on appropriate steps for cleaning and storage of Centurion
TM .