Toshiba STRATA CIX-CTX-QRG-VB VERSION B1 - Manual (Page 6)

6
Strata CIX/CTX DKT/IPT Telephone Quick Reference Guide 11/05
Hold
1. To place a call on Hold, press the
Hold
button.
2. To return to the held call, press the held line’s button.
If you do not return to the held call, it rings back to your phone.
If you are busy on another call, you hear two tone bursts. If the
held party hangs up, the call is released.
3. If you have additional lines at your station to hold, repeat Step
1 above.
! To place a call on Exclusive Hold
!
While on a call, press
Hold
twice. (No one can accidently
pick up your call.)
! To place a call on Automatic Hold
!
While on a call, press another extension button to receive/
originate a new call. You can switch between calls without
having to press
Hold
.
Make sure this feature is programmed on your system; if not,
existing calls will drop.
! To place a call on Consultation Hold
If you have multiple extensions on your phone, you can hold a
different call on each extension.
!
Press
Cnf/Trn
.
Call Forward - Any Calls (Internal & External)
There are two ways to perform each Call Forward:
! Enter the button sequence below
All Calls: Press Ext. +
#6011
or
________ + Destination No.
Busy: Press Ext. +
#6021
or
________ + Dest. No.
No Answer: Press Ext. + #6031
or
________
+ Dest. No. +
Timer (seconds, 2-digits) +
#
Busy No Answer: Press Ext. +
#6041
or
________ + Dest.
No. + Timer (seconds, 2-digits) +
#
Cancel: Press Ext. +
#6051
or
________
! ...or program a flexible button to perform the sequence
See “Flexible Buttons” for instructions.