Taylor AB-1002-BL - Manual (Page 11)

11
TROUBLESHOOTING
The Multi Chopper & Blender System will not operate.
•
Has a household fuse blown, or has a circuit breaker tripped?
• Is the power supply cord properly seated in the unit and the outlet?
• Is the inter-locking collar or jar secured properly?
• Has the cord been damaged in some way? If so, DO NOT USE THE APPLI-
ANCE. Contact Customer Service for replacement information.
The lid will not seal properly.
•
Is the product assembled properly?
• Is there food blocking the lid? If so, you may have too much food in the
blending jar. Remove some of the food and attempt to re-seal the lid.
Food is unevenly chopped.
•
Either you are chopping too much food at one time, or the pieces are not
small enough. Try cutting food into smaller pieces of even size and processing
a smaller amount per batch.
Food is chopped too fine or is watery.
•
The food is over processed. Use brief pulses, or process for less time.
Food is collecting on the sides of the bowl or container
•
You may be processing too much food. Turn machine off. When the blade
stops completely, remove cover and clean with a spatula, turning food inward
toward the blade. Only use a spatula, do not use hands or fingers.
Food hangs up on the blade.
•
You may be processing too much food or pieces are too large. See Chopping
Guide.