Toshiba SD-250E-S-TE - Manual (Page 30)

- 30 - EN
AUDIO SETUP
It is not possible to connect speakers directly to this DVD
player; an AV amplifier must be used.
DOWNMIX MODE:
This mode allows the DVD player analog audio outputs to
be matched to the features available on the TV in use.
Analog audio outputs can be selected as
STEREO: Two channels stereo.
Use this option if you have a stereo TV or a stereo HI-FI
system.
SURROUND:
Do not use this option if your DVD player is not connected
to a multichannel TV or multichannel AV receiver. It is
particularly important not to enable speakers, which are
not present. Otherwise serious sound quality problems
will be experienced.
DYNAMIC (Dynamic Range Compression):
Boosts frequency response. This item can be selected
between “OFF” and “FULL”.
LPCM OUTPUT:
This item can be selected as “LPCM 96K” or “LPCM 48K”.
DTS OUTPUT:
DTS Output can be selected as “ANALOG” or “DIGITAL”.
ANALOG : Use this setting if your player is connected to
your TV or to your audio system through analog audio
output or your digitally connected audio system doesn’t
support DTS decoding feature.
DIGITAL : Use this setting if your player is connected to
DTS decoding audio system via digital audio output.
LANGUAGE SETUP
Audio, disc menu and subtitle items will not be available if
the player is in RESUME (Pre-Stop) mode.
OSD LANG:
You can select the default OSD language of the player
menus
AUDIO:
You can select the default audio language if supported by
that DVD disc.
DISC MENU:
You can select the DVD’s disc menu language among
these languages. Disc menu appears in the selected
language, if supported by that DVD disc.
SUBTITLE:
You can select the default subtitle language if supported
by that DVD disc.
PARENTAL SETUP
PARENTAL SETUP page will not be available if the player
is in RESUME (Pre-Stop) mode.
Playing some DVDs can be limited depending on the age of
users. The “Parental Control” function allows playback
limitation level to be set by the parent.
PARENTAL SETUP (Parental Level):
Parental Level can be adjusted to one of the eight levels or
“NO PARENTAL”. “NO PARENTAL” or level “8 ADULT”
adjustments let you watch all of the DVD titles ignoring the
DVD disc’s parental level. You can watch the DVD discs,
which have the same or lower parental level than the
player’s selected level only.
PASSWORD:
Password to change the parental level can be set by using
this option.
You have to set a 4- digit password when you select a
parental level for the first time.You have to enter your
password every time you want to change the parental
level. If you forget your password please contact technical
service.
Change Password:
Using this item you can change the current password.
To change the password you will be prompted to enter
your old password. After you have entered your old
password, you can now enter the new 4-digit password.
You can use CLEAR key to delete the incorrect entry.
Press OPEN/CLOSE to activate parental setup setting
PREFERENCES
ANGLE MARK, CD MENU and DEFAULTS items will not be
available if the player is in RESUME (Pre-Stop) mode
ANGLE MARK:
This option allows you to turn on /off the angle mark on the
screen, which is displayed to indicate that a multi angle
scene has started. It also shows which angle you are
currently watching.
STANDBY TIME:
Standby activation time can be adjusted or standby can be
disabled using this option. If one of the time options is
selected, standby is activated, whenever no key is
pressed for the selected time duration in stop mode.
CD MENU:
This option allows you to enable or disable the CD MENU,
which is used for playing MP3, MPEG or JPEG CDs.
TRANSPARENCY:
Using this option one of the transparency levels can be
selected for on screen display.