Tyan Computer Trinity ATX Motherboard Tyan S1598 - Manual (Page 24)

http://www.tyan.com
24
Figure 2-13.
Make absolutely certain that you do not miss any pins, because if you do you
will void your warranty and cause damage to yourself or your motherboard
when you turn the system on. After connecting the power, make sure the
connector is seated firmly into its socket so it will not become loose or fall off
when the computer is jostled or moved. Note: Tyan recommends using one
that conforms to industry standard revision 2.01.
7. Installing Add-on Cards
There are a few rules you need to follow when plugging in a card. In order to
assure proper operation and a quick installation, adhere to these guidelines:
• If you are going to install a PCI-Bus interface card on your system,
be aware that any one of the two PCI slots can support a Master
or Slave device.
• NEVER force a card into a slot. If it doesn’t fit, look at the socket
on the computer to make sure there are no wires or other
obstructions to the slot.
• NEVER plug an ISA card into a PCI slot or a PCI card in an ISA
slot. You will void your warranty and damage your system board if
Chapter 2
Board Installation
Figure 2-12 Figure 2-13
!!!!!
important!