Using the cooktop – Thermador PSC486GL User Manual

Page 11

Advertising
background image

Sealed Burners

USING THE COOKTOP

Section Four: Using the Cooktop

The cooktop features four or six
gas surface burners; each rated
at 15,000 BTU/HR. The burners
are sealed to the stainless steel
top frame to prevent liquid spills
from accumulating below the
top surface, making it easier to
clean.

On all models, the two left
burners have the exclusive
ExtraLow‚ feature; the remaining
burners are standard. Each
burner has its own control knob.

ExtraLow

®

Burner

Control Knob

Sealed Star™ Burner Base

CONTROL KNOBS

The icon above each control
shows whether the burner
position is in the front or in the
rear. A solid star indicates the
location of the burner controlled
by that particular knob. The
drawing above shows the knob
controlling the rear burner.

Standard Burner

Control Knob

Bezel

Knob

Rear
Burner
Location

Setting
Indicator

The control knobs for two sealed
gas burners, one in front and one
in the rear, are located directly in
front of and below the pair of
burners on the control panel.

OPERATION OF THE
BURNERS

• Press in on the knob and turn

it counter-clockwise to the HI
setting.

• The igniter for the selected

sealed burner clicks and
sparks.

• After flame ignition, the

igniters stop clicking.

• Rotate the knob to any flame

setting between HI and LO.

• The Blue Burner Signal Light,

between the burners, will light
when adjacent burners are lit.
They will remain on until the
burner is turned off.

BTU Output for Standard Burners

• HI is equivalent to 15,000 BTU / HR.
• LO is equivalent to 2,200 BTU / HR.

BTU Output for ExtraLow

®

Burners

• HI is equivalent to 15,000 BTU / HR.
• LO is equivalent to 3,000 BTU / HR.
• XLO is equivalent to 370 BTU / HR.

ExtraLow

®

Burners

The controls for the two left
burners, front and rear, have
flame settings even lower than
the standard LO settings.

The drawing shows that the
control knob has an additional
range between the LO and XLO
settings. When the knob is set
within this range, the flame
pulses off and on. By varying the
length of time the flame is off
and on, the heat is reduced even
further to cook delicate foods.
For example, these very low
settings are suitable for
simmering and poaching,
melting chocolate and butter,
holding cooked foods at
temperatures without scorching
or burning, etc.

ExtraLow

®

Range

Front

Burner

Location

Page 9

Advertising
This manual is related to the following products: