Tyco LPE-200 - Manual (Page 41)

41
selected group, the radio will switch to the
selected group since it has priority.
• The radio will continue scanning if a new
group is selected when scan is on.
•
Pressing the PTT button when scan is on will
cause the radio to transmit on the displayed
group or to the currently selected group
(depending on programming).
Adding Groups to a Scan List
SCAN Model Radios
1. Scan must be off to add/delete groups to/from
the scan list. If the scan icon is on, press the
S key to turn scan off.
2. Select the desired group using the
SYSTEM/GROUP/CHANNEL knob and/or the
< or > keys. If the selected group is
currently on the list, pressing
A will display
on line three.
3. If the scan list status icon is blank ( ), the group
can be added to the scan list by pressing the
A key. will be displayed on line three.
4. Press the A key a second time to set the
group to Priority 2. A is displayed on line three.