Tripp Lite F200-003-R - Manual (Page 10)

Connecting Your FireWire
Peripheral
(Cont.)
Windows 98 SE Instructions:
1) Connect the FireWire A-B cable (included in this
package) to your new FireWire card.
2) Before connecting the digital video camera, please make
sure it’s powered ON. It’s also good practice to power the
camera from your wall power outlet to conserve battery
power. Some digital video cameras will not properly
communicate with the PC if they’re not powered through
the wall outlet. Connect the FireWire A-B cable to your
camera.
3) Windows 98 SE will now load the appropriate driver for
you. This process is handled in the background, and
requires no input from the user.
4) To determine if the installation process was successful,
right-click on the MY COMPUTER icon, then select
PROPERTIES. Under the DEVICE MANAGER tab, you
should see a heading labeled IMAGING DEVICES. If you
click on IMAGING DEVICES and see a MICROSOFT DV
CAMERA & VCR, the installation was successful. If the
above device is not listed in the DEVICE MANAGER,
make sure the camera is turned on and properly
connected to the FireWire card.
200202128 Manual in 5 Languages.qxd 3/21/02 4:41 PM Page 10