Toshiba TEC Electronic Computing Scale SL-4700 - Manual (Page 15)

4 Error Messages
SL-4700 Owner Manual 15
4 Error Messages
Display
overflow
If a persistent error message appears or the
scale locks up, disconnect then reconnect the
scale to the power supply. If the scale remains
inoperative, contact your authorised service
agent.
Display overflow error
The load on the weighpan exceeds the scale capacity.
Balance failed error
On power up the weight is out of the allowed zero range.
Check there is no load or debris on the weighpan.
Error codes:
E 10 Battery failure. Replace the batteries.
E 30 Management mode not exited correctly. Re-enter
Management mode and repeat the procedure.
E 35 Prohibited function.
E 151 Configuration change in Management mode has
failed. Re-enter Management mode and repeat the
procedure
E 152 Prohibited function.
Contact your authorised service agent if the scale remains
inoperative or you see any other error message code.
Weight
unsteady
Balance
failed
Under
range
Over
range
(