Toshiba HHGP1 - Manual (Page 4)

 2 
6 F 2 S 0 7 3 8
• Installing arrester
Install a surge arrester between the antenna and the GPS receiver and ground it in accordance
with the guidelines in this manual. Otherwise, it may cause electric shocks, injury or
malfunction.
• Exposed terminals
Do not touch the terminals of this equipment while the power is on, as the high voltage generated
is dangerous.
• Residual voltage
Hazardous voltage can be present in the DC circuit just after switching off the DC power supply.
It takes approximately 30 seconds for the voltage to discharge.
• Fibre optic
When connecting this equipment via an optical fibre, do not look directly at the optical signal.
CAUTION
• Earth
The earthing terminal of the equipment must be securely earthed.
CAUTION
• Operating environment
The equipment must only used within the range of ambient temperature, humidity and dust
detailed in the specification and in an environment free of abnormal vibration.
• Ratings
Before applying the DC power supply to the equipment, check that they conform to the
equipment ratings.
• Connection cable
Carefully handle the connection cable without applying excessive force.
• Modification
Do not modify this equipment, as this may cause the equipment to malfunction.
• Disposal
When disposing of this equipment, do so in a safe manner according to local regulations.
DANGER
WARNING