Toshiba PDR-M11 - Manual (Page 37)

- 33 -
Basic
Photography
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready
Turning the Power ON/OFF
Turning the Power ON
Make sure that the SmartMedia™ is correctly loaded. ( ➲ Page 29)
Set the mode dial to the desired mode.
When the camera is turned ON, the Auto Power OFF function starts
to work.
IMPORTANT
• If no operation is carried out for a fixed amount of time (default: about 1 minute), the power is turned
OFF to prevent battery wear. This is called “Auto Power OFF”. To return to the normal state, either
change the mode dial or press the shutter down fully. (
➲ Page 37)
☞
About the Auto Power OFF Function ➲ AUTO-OFF (page 72)
Turning the Power OFF
Set the mode dial to [ ].
27-35 PDRM11-E 01.6.28, 9:37 AM 33