Toshiba Electromagnetic Flowmeter Converter TIC-LF232A - Manual (Page 7)

TIC-LF232A
7
Table 1. Specification Code for converters (LF232)
Model Specification Code
1 2 3 4 5 6 7 8 9 10 11 12 13 14
Contents
L F 2 3 2 Separate type converter
A
Purpose
Standard
A
B
Compatible detectors (Note1,2,3)
Medium to small-size detectors:
Meter size 1/10” to 18” (2.5 to 450 mm)
Large-size detectors:
Meter size 28” to 120” (700 to 3000 mm)
C
E
Mounting nuts and bolts
Panel, wall mounting (BNP material : SUS304)
Pipe mounting (BNP material : SUS304)
1
3
Digital input/output
Current output
+ Digital output points (1 point)
Current output
+ Digital output points (4 points) + Digital input points (2 points)
1
Communication function
HART communication
1
2
Power supply
100Vac-240Vac, 50/60Hz (Note 2)
24Vdc (Note 3)
A Standard
Note 1: For applicable detector code, select one from the following table.
To combine with an existing detector, select one depending on the type of replaceable converters.
For combination with detectors not listed below, contact Toshiba.
Applicable
detector code
Applicable
detector
Applicable detector
(discontinued model)
Replaceable converters
A LF470 type
334,
335 type (Converters of
types shown right) 372, LF200, LF220, LF420,
LF230* A type
B LF150 type
337,
335 type (Converters of
types shown right) 373, 378, LF230* B type
Note 2: When the 7th digit is “B” and power supply specification code is “1”, power supply specification is 100 to
120VAC.
Note 3: 24VDC can be specified only when the 7th digit is “A”.