Tandberg Data SDLT 600 - Manual (Page 16)

Referenced Documents SDLT 600 Product Manual
1-2 March 2004 81-81184-02 REV A01
1.2 Referenced Documents
• SDLT 600 Fibre Channel Interface Guide (81-81202-01)
• SDLT 600 SCSI Interface Guide (81-81200-01)
• SDLT 600 Design and Integration Guide (81-81196-01)
• Super DLTtape™ Interactive Library Interface Specification (6464162-01).
1.3 Related Documents
• SDLT 600 Product Specification (81-81218-01)
• SDLT 600 User Reference Guide ( 81-81220-01).
1.4 Structure of this Manual
• Chapter 1, “Introduction,” is the chapter you are currently reading.
• Chapter 2, “SDLT 600 Tape Drive Product Information,” describes various features of the
SDLT 600 tape drive technology and the modular design used to build this exciting product.
• Chapter 3, “SDLT 600 Tape Drive Specifications,” lists various specifications for the SDLT 600
tape drive system: product, functional, environmental, and recording media.
• Chapter 4, “Installing Your Tape Drive,” contains handling and pre-installation guidelines,
configuration advice, plus mounting and installation information for your SDLT 600 tape drive.
• Chapter 5, “Using Your Tape Drive,” contains information on running the self-test, descriptions
of the front panel controls and LEDs, procedures for updating the firmware (microcode), and
various pointers for caring for your SDLT 600 tape drive.
• Chapter 6, “Regulatory Compliance,” lists various regulations that apply to the SDLT 600 tape
drive.
• Appendix A, “Super DLTtape I and Super DLTtape II Data Cartridges,” provides
information for the Super DLTtape™ I and Super DLTtape II data cartridges including handling
and inspection procedures, information on the write-protect switch, and how to load and unload a
data cartridge.