Topcom NM-500-H - Manual (Page 5)

TOPCOM NM-500 5
TOPCOM NM-500
ENGL
ISH
4 Getting started.
4.1 Using the massager
• Connect the small plug of the enclosed power adapter to the power adapter Jack (3) and the other
end of the adapter cable to the electric socket (230V/50Hz).
Only use the power adapter supplied (DC 6V, 800mA). Do not use other adapters, as this
may damage the device.
The wall outlet for the power supply must be close and easy accessible.
• Place the massager arround your neck and gently bend the frame to the
desired position.
• Press the massage ON/Intensity button (1) to activate high intensity
massage.
• Press the massage ON/Intensity button (1) a second time to activate low
intensity massage.
• Press the heat button (2) to activate/deactivate the heating function.
When selecting the massager together with the heat function, there
will be a slight decrease of the vibration strenght. This adjustment
is perfectly normal and should not be interpreted as a defect.
• Press the Massage ON/Intensity button (1) a third time to stop the
massage.
5 Technical data
6 Cleaning
• Disconnect the device and allow it to cool down.
• Clean it with a soft, slightly damp sponge.
• Never allow that water or any other liquid enters the device or accessories.
• Never use abrasive cleaners, brushes, gasoline, kerosene, glass polish or paint thinner to clean.
7 Disposal of the device (environment)
At the end of the product lifecycle, you should not throw this product into the normal
household garbage but bring the product to a collection point for the recycling of electrical
and electronic equipments. The symbol on the product, user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling point. By re-
using some parts or raw materials from used products you make an important contribution
to the protection of the environment. Please contact your local authorities in case you need more
information on the collection points in your area.
Dimensions (W/H/D)
Weight
Rated voltage 300 x 310 x 130 mm
392 g (without adapter)
Input: AC 230V/50-60 Hz
Output: DC 6.0 V - 800 mA
MASSAGE
HEAT