Topcom Allure 400 - Manual (Page 4)

4 Topcom Allure 400
Topcom Allure 400
5 Buttons / connections
(See picture on folded cover page)
1. In use LED
2. LCD display
3. Direct memory keys
4. Pause / VIP key
5. Ringtone / Hold key
6. Up key
7. Delete key
8. Indirect memory key
9. Down key
10. Numerical keypad
11. Redial key
12. Handsfree key
13. Flash / LCD contrast
14. Curl cord connection
15. Redial list key
16. Program key
17. Hook Switch
18. Line connection
19. Handsfree volume switch
20. Ring volume switch
6 Installation
Put batteries in the battery compartment to acti-
vate the display :
• Open the battery compartment at the bottom
of the unit.
• Insert 3 Alkaline AA standard batteries.
• Close the battery compartment.
• Connect one end of the line cord to the
telephone line wall socket and the other end
to the backside of the telephone.
7 Telephone settings
7.1 Set the time and date
When you have a subscription to the caller ID
service and your telephone provider sends the
date and time together with the telephone
number, the phone’s clock will be set automatical-
ly. The year must always be set manually !
• Press
• Use / to select “
VHW GDWH
”
• Press to enter the settings
• Use / to change
• Press to move to the next digit
• Press to exit the menu
7.2 Set the area code
When you have a subscription to the caller ID
service it can be necessary in some countries to
enter your area code. When the telephone re-
ceives a caller ID it will remove the entered area
code from the incoming number.
• Press to enter the menu
• Use / to select “
VHW &2'H
”
• Press to enter the settings
• Use / to change
• Press to move to the next digit.
• Press to exit the menu
7.3 Set the PBX code
When your phone is connected to a PBX system
you can enter the PBX line access code.
The line access code will be added when dialling
out a number from the caller ID list.
When the line code is “0”, no digit will be added by
the phone.
• Press to enter the menu
• Use / to select “
S&2GH
”
• Press to enter the settings
• Use / to change select the digit
• Press to exit the menu
The telephone line needs to be
disconnected prior to opening the
battery door!