Top Innovations MC1910 - Manual (Page 7)

EMPTYING THE DUST CUP
If the dust cup filter (7) becomes clogged, perform the following procedure:
1. Remove the dust cup (6) and dust cup filter (7).
2. Empty the dust cup (6) and rinse the dust cup filter (7) in clean water.
3. Allow the dust cup filter (7) to dry.
4. When dry, replace the dust cup filter (7) and the dust cup (6).
The unit is now safe and ready to perform at maximum capacity.
6 Top Innovations, Inc.
CAUTION: Make sure that you hold the handle firmly, if not it could
slip out of your hand and cause an injury.
CHANGING & CLEANING FILTER
1. Remove dust cup (6) and dust cup filter (7).
2. Empty the dust cup (6).
3. Empty the dust and dirt from the Dust Cup (6).
4. Shake loose any build up on the filter before installing it to its
proper position.
5. Attach the dust cup (6) and dust cup filter (7), and continue
cleaning.