Maintenance, Operation (continued) – Troy-Bilt TB3000 User Manual

Page 13

Advertising
background image

13

Operation (continued)

Fig. 5-6

DECORATIVE TRIMMING

Decorative trimming is accomplished by removing all
vegetation around trees, posts, fences, etc.

Rotate the whole unit so that the cutting attachment is
at a 30° angle to the ground (Fig. 5-6).

Section 6

MAINTENANCE

NOTE: Some maintenance procedures may require
special tools or skills. If you are unsure about these
procedures take your unit to an authorized service
dealer.

MAINTENANCE SCHEDULE

These required maintenance procedures should be
performed at the frequency stated in the table. They
should also be included as part of any seasonal tune-
up.

MAINTENANCE NEEDED

Fill fuel tank with correct oil and fuel mixture.

Clean and re-oil air filter.

Check spark plug condition and gap

WHEN

Before Starting Engine

Every 10 Hours

Every 50 Hours

GO TO:

Page 10

Page 16

Page 17

To prevent serious injury, never do maintenance
or repairs with unit running. Always do mainte-
nance and repairs on a cool unit. Disconnect
spark plug wire to ensure the unit will not start.

Advertising