True Manufacturing Company TCGD-50 - Manual (Page 14)

............ www.truemfg.com ............
True Food Service Equipment, Inc.
12 12
MAINTENANCE, CARE & CLEANING
LIGHT BULB REPLACEMENT
SHELF MOUNTED BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the unit
is either turned off or unplugged.
A. Unplug the light assembly from the receptacle
on the interior side wall. Remove shelf and light
assembly from cabinet.
B. Remove the lampshield by gently squeezing the
sides together and rotating out (image 1).
C. Remove bulb from the corded end of assembly by
holding the bulb and gently pulling up on spring
loaded lampholder which will allow enough clear-
ance to remove bulb (image 2).
NOTE
All spring loaded lampholders are located on the left side
of the cabinet as you face the front.
NOTE
Please be aware of your local ordinances for disposal of
old florescent bulbs. These bulbs should be disposed of in
a safe and proper manner.
D. Install new bulb using spring loaded lampholder.
E. Reinstall light assembly and shelf. Plug cord into
side wall receptacle.
INTERIOR TOP BULB REPLACEMENT:
WARNING
When replacing a light bulb make sure power to the unit
is either turned off or unplugged.
A. Remove the lampshield by gently squeezing the
sides together and rotating out (image 3).
B. Remove bulb by gently pushing bulb back into
spring loaded lampholder which will allow enough
clearance to remove bulb (image 4).
C. Install new bulb using spring loaded lampholder.
D. Reinstall light lampshield by sliding rear "U" chan-
nel of lampshield over metal bracket and gently
squeezing lampshield to fit front "U" channel over
front metal bracket (images 5-6).
E. Image 7 shows assembly properly installed.
4
5 6
3
2 1
➟
7
➟
➟
➟
Squeeze lampshield and
rotate out.
Remove bulb by gently
pulling up on spring loaded
lampholder.
Squeeze lampshield and
rotate out.
Remove bulb by gently pushing bulb
into spring loaded lampholder.
Squeeze lampshield "U"
channel into position
over metal bracket.
lampshield "U" channel
in position over metal
bracket.
Interior top light assembly
properly installed.
➟