Toshiba PDR-M61 - Manual (Page 77)

- 75 -
Basic
Photography
Playing Back/
Erasing Images
Other
Applications
Additional
Information
Getting Ready Formatting erases all images currently recorded on the SmartMedia™ loaded on your camera. Protected images
(
➲ Page 76) are also erased. SmartMedia™ cannot be formatted if it is write-protected ( ➲ Page 32).
IMPORTANT
• The SmartMedia™ must be formatted on the camera before use.
Set the mode dial to [ ], [ ] or [ ].
When [ ] is selected, the last image frame appears on the LCD monitor.
Hold down the erase button for two seconds.
The ERASE menu is displayed.
Use the or buttons to select [FORMAT] 1 .
Make sure that [FORMAT] is displayed in yellow at the bottom right of
the screen.
Use the or buttons to select [YES] 2 , and press
the ENTER button.
To cancel formatting, select [NO], and press the ENTER button.
To reset the image number, use the or buttons to
select [YES], and press the ENTER button.
To cancel resetting of image numbers, select [NO], and press the
ENTER button.
Formatting the SmartMedia™
ERASE
FRAME ALL FORMAT
YES
100
0004
NO
2
1