Therma-Tru Double-door - Manual (Page 3)

SPEC
Door System
Specifications
DOOR PANELS
OPTIONAL
FACTORY-GLAZED
GLASS OR GLASS
INSERTS
GASKETING,
WEATHERSTRIPPING
HINGES, STRIKES
FRAMES
SILL, SWING-IN, SWING
OUT, SIDELITE OPTIONS
TRANSOM OPTIONS
⎠
Smooth-Star Door System Specifications
Faces: 1/16-inch minimum thickness, fiberglass-reinforced thermoset composite,
surface lightly textured with 80-grit brushing, accepts most exterior and interior paints.
Color: white. Door edges: machinable kiln-dried pine, primed to match color of faces,
lock edge reinforced with laminated veneer lumber core, lockset area reinforced with
solid blocking for hardware backup. Door bottom edge: moisture-proof and decay-
proof composite.
Core: foamed-in-place polyurethane, CFC-free, density 2.0 pcf
minimum, K-factor of 0.15 for minimum thermal transmittance. Standard factory sizes
may be edge trimmed or end trimmed in shop or field to suit replacement door size
requirements.
Factory-glazed:
Inserts (lites):
perimeter moldings flush with skin and made as integral part of skin.
Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between, air-
space typically 3/8-inch. Options for grooved Bevelline, Low-E, or grille between glass
(
). Optional removable wood grilles.
perimeter frames in raised-molding patterns, frame moldings molded or
extruded from proprietary thermoplastic compounds formulated for exterior exposure
and weatherability. Certified to withstand high service temperatures resulting from
exposure behind storm doors or dark finishes. Frames paintable, screw-fastened to
doors, screw holes concealed with grain-matched plugs in matching material and finish.
Glass minimum 1/8-inch tempered, two thicknesses with sealed airspace between,
airspace typically 1/4-inch. Options for leaded decorative glass, triple-glazed in airspace
between tempered glass faces, with solid brass or zinc caming. Etched glass options.
Low-E Options. Optional removable wood grilles.
GBG
Swing-in models:
Swing-out models:
jacketed thermoset closed-cell foam, press-fit in kerfs at jamb stops in
frames. Extruded thermoplastic elastomer, finned and chambered design, press-fit into
bottom edge of doors. Corner pads at bottom margin corners from jacketed thermoset
closed-cell foam.
same weatherstrip as swing-in models, bottom gaskets integral
with sills.
Steel, zinc-plated, brass or chrome finish. Screws plated and finished to match
hardware. Min-imum hinge size 4 x 4 x .098 inches. Strikes are proprietary adjustable
type, permitting in-out adjustment of door in frame, up to 3/16 inch.
Milled from 5/4 kiln-dried white pine, profiled with 1/2-inch stop, minimum depth
4-9/16-inches. Other frame depths available to match wall constructions. Exterior
casing brickmould in WM180 pattern available. Optional maintenance-free clad frames
and brickmoulds are prefinished white.
Wide range of sill options:
Double-door and hinged patio door models:
Sidelite options:
thermally-broken fixed, adjustable with oak threshold,
swing-in, swing-out, public-access, aluminum brass or bronze anodized finish.
double door ion 6/8 height and 8/0 height
available with both leaves active and locking astragal available, hinged patio doors in
standard 6/8 height, replacement 6/6 height, and 8/0 height available, patio models
available in two-panel and three-panel options (one door active, others stationary).
raised molding models, and raised panel models with glass moldings to
match doors, in 12-inch and 14-inch widths. Sidelite systems available with mullions
separating doors from sidelites, and continuous sills and frame head, or as separately
framed and cased units, joined together.
Transom frames, either rectangular or elliptical, match door frames and have matching
exterior brickmould. Clear insulated glass or with decorative leaded glass detailed with
solid brass or zinc caming.
Optional removable muntins for divided-lite look in
rectangular transoms.
OPTIONAL
DECORATIVE PANELS Molded from fiberglass-reinforced composite, surface lightly textured with 80-grit
brushing, accepts most exterior and interior paints, fastened with very high bond tape.
Issued: Oct 2008