Topfield TF 5400 PVR - Manual (Page 67)

7.1 Recording a program 61
7.1.4 Recording by electronic program guide
If an electronic program guide
is properly provided on the ser-
vice you wish to record, you can
set a timer recording in it by per-
forming the following steps:
1. Select a service you want to record.
2. Press the
✄
✂ ✁
GUIDE
button to display its electronic program
guide.
3. Select a program you want to record. Pressed the
✄
✂ ✁
OK
button one time, P is marked up on the program entry;
pressed once more, R is marked up. The former indi-
cates turn-on, the latter indicates record-on.
4. This timer recording is put on the timer list. To edit this
timer recording, press button, then a timer edit box
appears, in which you can change its timer settings.
5. To remove the marking, press the
✄
✂ ✁
OK button once again.
7.1.5 Recording when using time shift
While you are watching a program by time shift function, you
can record the program by performing the following steps:
1. Press button to start time shift.
2. To find a desired recording position, press button or
button unceasingly until you find it.