Toshiba multifunctional digital color systems e-STUDIO4540C - Manual (Page 203)

2 SETTING ITEMS (ADMIN)
IEEE 802.1X Authentication Setting 201
IEEE 802.1X Authentication Setting
This menu allows you to make settings for IEEE 802.1X authentication that will apply to wired networks.
This equipment supports the following authentication methods:
y EAP-MD5
y EAP-MSCHAPv2
y EAP-TLS
y PEAP
The following protocol is available for inner authentication:
- EAP-MSCHAPv2
y EAP-TTLS
The following protocols are available for inner authentication:
- PAP
- CHAP
- EAP-MSCHAPv2
- EAP-MD5
The following certificates are required for each authentication method using TopAccess to enable IEEE 802.1X
authentication:
For instructions on how to install certificates, refer to the TopAccess Guide “Chapter 8: [Administration] Tab
Page”.
The settings for IEEE 802.1X authentication depend on the authentication method you select.
„ Setting IEEE802.1X authentication
1 Press [802.1X SETTINGS] on the ADMIN menu (1/2).
The WIRED 802.1X SETTINGS screen is displayed.
To display the ADMIN menu, see the following page:
P.75 “Entering Admin Menu”
Authentication Method Inner Authentication Method CA Certificate User Certificate
EAP-MD5 — — —
EAP-MSCHAPv2 — — —
EAP-TLS — Required Required
PEAP EAP-MSCHAPv2 Required —
EAP-TTLS PAP Required —
CHAP Required —
EAP-MD5 Required —
EAP-MSCHAPv2 Required —