Texas Instruments 6100 - Manual (Page 97)

Troubleshooting Tips
Care and Troubleshooting 8-3
Troubleshooting Tips Errors at startup
Error Corrective Action
Computer does not
come on when power
switch is in the on
position. • The battery may be low. Use
the AC adapter and recharge
the battery.
• Ensure the AC adapter cable
and power cord are securely
connected.
• Connect the AC adapter to
another outlet.
Computer power is on
but the screen is blank. • Press Fn-
↑
to increase
screen brightness.
• Press Shift to terminate
Suspend mode.
• The computer may be set to
use the external monitor.
Press Fn-F12 to switch to
the internal screen.
Save-to-disk file is too
small This message occurs when you
add memory or compress the
save-to-disk file using
DRVSPACE. Use the MS-DOS
program PHDISK to increase the
size of the save-to-disk file.
Refer to instructions in Chapter
3 to correct.
Save-to-disk file is
missing Use the MS-DOS program
PHDISK to create a new save-
to-disk file. Refer to instructions
in Chapter 3 to correct.
Swap file is missing Create a swap file in Windows
for Workgroups (Main> Control
Panel> Enhanced> Virtual
Memory).
eug-8.frm Page 3 Saturday, January 25, 1997 11:17 AM