Installation, Specifications – TOA Electronics C-A711DM User Manual
Page 2
* The object illumination of the camera equipped with the C-A711DM needs approximately 3.3 times that of the C-CC714
and C-CC764 Camera with the pre-installed dome cover.
Note: The design and specifications are subject to change without notice for improvement.
Cover: PC resin, Light gray
Dome: PC resin, Smoked (Transmission factor: 30%)*
ø219.8 x 115 (H) mm (Dome: ø150 mm)
C-CC714, C-CC764
Finish
Dimensions
Applicable Camera
Be sure to attach the Smoked
Dome Cover to the Camera
after hanging the safety wire.
3. INSTALLATION
Detach the pre-installed transparent cover from the camera, and attach the Smoked Dome Cover instead.
For attaching procedures, refer to the installation manual supplied with the Camera.
4. SPECIFICATIONS
Printed in Japan
133-12-951-70