Triad Speakers 3410 - Manual (Page 8)

6
Printing Current Printer Settings
Printing Current Printer Settings
Use the list of current printer settings to identify menus and to determine
which settings you need to change. For example, if you are changing the CPI,
change all occurrences of the CPI shown on the printout.
You can also use the Pacemark 3410 Triad Default Printer Settings table on
page 5 to identify printer menus, and as a reference to the Triad default
printer settings.
To print the current printer settings:
1. Press PRINT QUALITY and CHARACTER PITCH at the same time to enter Menu
Mode.
Menu Mode prints on the printer paper.
2. Press PRINT to print the current printer settings.
Set-Up Graphics
Receive Buffer Size
Paper Out Override
Print Registration
Operator Panel Function
Reset Inhibit
Print Suppress Effective
Auto LF
CSF Bin Select
Time Out Print
Auto Select
Sensor Disable Bi-directional
28K
No
0.00 mm
Full Operation
No
Yes
No
Bin 1
Valid
No
No
Serial I/F Parity
Serial Data 7 or 8 Bits
Protocol
Diagnostic Test
Busy Line
Baud Rate
DSR Signal
DTR Signal
Busy Time None
7 Bits
Ready/Busy
No
SSD-
9600
Invalid
Ready On Power Up
200 ms
Pacemark 3410 Triad Default Printer Settings ( continued )
GROUP ITEM SET