Fuel level indicator, Pto/blade engage handle, Parking brake/cruise control lever – Troy-Bilt TB2246 User Manual

Page 14

Advertising
background image

Fuel Level Indicator

The Fuel Level Indicator is located on the left side of the

tractor’s dash and indicates the amount of fuel in the gas

tank.

PTO/Blade Engage Handle

Activating the PTO engages

power to the cutting deck or other

(separately available) attachments.

Push forward on the

PTO/Blade Engage handle to

activate it. Pull the PTO/Blade

Engage handle back to disengage

the power to the cutting deck

or other (separately available)

attachments.
NOTE: The PTO/Blade Engage handle must be in the disengaged

(OFF) position when starting the engine.

100%

50%

0%

Parking Brake/Cruise Control Lever

Located in the center of the tractor’s dash

panel below the steering wheel, the Parking

Brake/Cruise Control lever is used to engage

the parking brake and the cruise control.

Refer to the Operation section of this manual

for detailed instructions regarding the

parking brake.
NOTE: The parking brake must be set if the

operator leaves the seat with the engine

running or the engine will automatically shut

off.
NOTE: Cruise control can NOT be engaged

at the tractor’s fastest ground speed. If the

operator should attempt to do so, the tractor

will automatically decelerate to the fastest

optimal mowing ground speed.

WARNING!

Never leave a running machine

unattended. Always disengage PTO, set parking

brake, stop engine and remove key to prevent

unintended starting.

14

s

ectiOn

4— c

OntrOls

and

f

eatures

Advertising