Toshiba MD24F51 - Manual (Page 27)

27
TV operation
AUDIO SELECT
Sound control adjustment/
Stereo and Second Audio Program (SAP)
Sound controls are factory preset but you can adjust them individually as follows:
The TV/DVD is equipped with a feature known as multi-channel TV sound or
MTS. MTS broadcasts greatly enhance TV viewing by bringing you programs
with high fidelity stereo sound.
MTS also provides an extra channel called the Second Audio Program or SAP
which broadcasters can use to transmit a second language for bilingual transmis-
sion or for other purposes.
CANCEL
MENU
/ / /
Press or to select “AUDIO”, then press
.
1
2
Press MENU, then press or to select
option.
After your desired setting press MENU
repeatedly until the menu screen is cleared. 4
Press or to select the item you want to
adjust, then press or to adjust the setting.
3
BASS:
Press
or to adjust the bass sound.
TREBLE:
Press
or to adjust the treble sound.
BALANCE:
Press
or to obtain an equal sound level from
both speakers.
SURROUND:
Press
or to select “ON” or “OFF”.
ON: The dynamic presence and sound created of-
fers a thoroughly enjoyable listening experience.
OFF: Normal sound.
STABLE SOUND :
Press or to select “ON” or “OFF”.
ON: The Stable Sound feature limits the highest
volume level to prevent extreme changes in
volume when the signal source is changed.
OFF: Normal sound.
3 3 3 3 3 To return BASS/TREBLE/BALANCE control
adjustments to the factory preset levels
Press CANCEL while making sound adjustments.
Sound control adjustment
When the TV is turned on or a channel selection is
made, make certain the “STEREO” appears on the
screen. This means that Stereo broadcasting is avail-
able. You can enjoy stereo sound from the left and
right speakers.
• When mono broadcasting is received, no indication is
displayed.
• If the broadcast signal is not strong enough or clear
stereo sound is not available, press AUDIO SELECT to
change to mono sound. The noise should be elimi-
nated. Press it again to return to the stereo sound.
STEREO CH 013
STEREO+SAP BROADCASTING
Press AUDIO SELECT to select the desired sound.
When the TV is turned on or a channel selection is
made, make certain the SAP appears on the screen.
This means that the Second Audio Program
broadcasting is available.
MONO + SAP BROADCASTING
MONO SOUND
(MAIN)
SAP SOUND
STEREO SOUND
(MAIN)
MONO SOUND
(MAIN)
SAP SOUND
STEREO SAP CH 013
SEL. STEREO
To select desired sound
Listening to stereo sound
Listening to SAP (Second Audio Program)
PICTURE
AUDIO
PICTURE PREFERENCE
PICTURE
AUDIO
PICTURE PREFERENCE
BASS 0
TREBLE 0
BALANCE 0
SURROUND OFF
STABLE SOUND OFF
5S10101A [E] (P24-27) 2/5/05, 9:43 AM 27