FoodSaver VAC 1200 - Manual (Page 2)

Plug in the power cord.
Set the Sealing Time Switch to “2.”
Cut a piece from the FoodSaver Roll that is long enough
to cover the item plus three inches. Use the marks
on the roll to guide you in making a straight cut.
Open the lid.
Place one end of the bag on the Sealing Strip.
Make sure the end does not extend over the black
foam rubber ring or into the Vacuum Channel.
Close the lid.
Press on the lid with the palms of your hands then
release. The solid green light will turn on.
When the green light goes off, the sealing process is complete.
Open the lid and remove the bag.
You now have a custom-size FoodSaver Bag!
Vac 1200
Choose a FoodSaver Roll or a ready-made FoodSaver Bag.
If using a FoodSaver Bag, go to Step 2. If using a FoodSaver Roll, start here.
Step 1: How to use a FoodSaver Roll to make a bag.
1.
2.
3.
4.
5.
6.
7.
8.
9.
T H E F O O D S A V E R ® Q U I C K S TA R T