Toshiba DVR8-X - Manual (Page 74)

56
Auto Sequencing Setting
Auto Sequencing is used either in the main screen when Auto Sequencing has been enabled or when a Spot-Monitor Out signal is
used to display video on a spot monitor. Auto Sequencing conveniently displays video channels and at specified intervals, sequences
through each selected channel.
Channel Selection Click each channel to include in Auto Sequencing.
Custom Mode Enable to create non-standard screen divisions
Skip 0 FPS Channel Sequence skips cameras with no video signal.
Create Custom Auto Sequence
1. Open General Setup and click the Sequence Setting Button
2. Click individual cameras in the left pane or click the Select All Button to include all cameras in the sequence
3. Select an interval time (in seconds) to display each screen in the sequence
4. Select Screen Division options for appropriate cameras
5. Click the OK Button
Screen Division Options
Enable All Cameras
Enable Sequencing
Select interval between
switching cameras