TechniSat EC 4004 - Manual (Page 9)

The colour intensity can only be modified when receiving D-MAC or D2 MAC channels. When the receiver has
been disconnected from the power supply, the standard value is reset.
> with intensity higher
COLOUR
COLOUR
> with intensity lower
4.2.2 Sound channels
MAC channels have 8 (D2 MAC) or 16 (D MAC) sound channels which the channel issuer can use for example
for the broadcasting of different languages.
a) "Normal" sequence (determined by the channel issuer)
NF
> press
•
until "nor" is displayed
MAC
> switch continuously with or
NF
> select directly with
•
plus numerical key.
b) "Favoured" sequence (sorted on languages)
NF
> press
•
until "FAv" is displayed
MAC
> switch continuously with or
NF
> select directly with
•
plus numerical key.
The numbers 1 to 8 represent the following languages:
1: German 2: English 3: French
4: Italian 5: Spanish 6: Dutch
7: Danish 8: Swedish
When the selected sound channel is not occupied, the permanent television primary sound is activated.
MEM
> press • to memorize (e.g. using a ball point pen)
4.2.3 MIX operation
Channel issuers have the possibility of combining two sound channels (for example the stadium noise and the
comment in a football match broadcast).
The receiver automatically detects and mixes these sound channels.
MIX
Press
•
to turn off the MIX sound mode and to listen to the main channel only (for example the comment). The
setting cannot be memorized.
4.3 Teletext
TechniSat EC 4004
9
*EC 4004 ENGL. 14.12.1999 9:56 Uhr Seite 9