Thermos EXPRESS 465630503 - Manual (Page 10)

10 • Grill2Go Express
1. Assemble FRONT handle hub to leg as shown below.
a. Insert “foot” into large hole.
b. Press hub flat against leg.
c. Align coach bolt hole with hole in aluminum block.
d. Push long coach bolt through aluminum block on the back side of leg.
e. Permanently attach hub to leg with two self-tapping handle hub screws. DO NOT
OVERTIGHTEN SCREWS. Stripping may occur.
Long coach bolt passes completely
through holes in plinth and leg.
Front Handle Hub
(Part MM)
Handle Hub
Screw
Foot
Graphics In Front
2. Assemble REAR handle hub to leg by repeating steps 1a–1e.
Graphics In Front
Long coach bolt passes completely
through holes in plinth and leg.
Rear Handle
Hub
(Part NN)
Foot
Handle
Hub Screw