Connecting to audio equipment – Toshiba SD-P1880SE User Manual

Page 57

Advertising
background image

57

Connections

Connecting to Audio Equipment

You can enjoy high quality dynamic sounds by connecting the player to audio
equipment.

CAUTION
• When you are connecting (via the BITSTREAM/PCM

jack) an AV decoder that does not have Dolby Digital,
Digital Theater Systems (DTS) or MPEG2 decoding
function, be sure to set “Digital Out” to “PCM” from the
on-screen displays

46 50

. Otherwise, high volume

sound may damage your hearing as well as the
speakers.

• When playing DTS-encoded discs (audio CDs),

excessive noise may be output from the analog audio
output jacks. To avoid possible damage to the audio
system, you should take proper precautions when the
analog audio output jacks of the player are connected to
an amplification system. To enjoy DTS Digital Surround

®

playback, an external 5.1 channel DTS Digital
Surround

®

decoder system must be connected to the

BITSTREAM/PCM jack of the player.

Notes
• DO NOT connect the BITSTREAM/PCM jack of the player

to the AC-3 RF input of a Dolby Digital Receiver. This
input on your A/V Receiver is reserved for Laserdisc use
only and is incompatible with the BITSTREAM/PCM jack
of the player.

• Connect the BITSTREAM/PCM jack of the player to the

“DIGITAL (OPTICAL)” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment

as well.

• When you connect the player to other equipment, be sure

to turn off the power and unplug all of the equipment from
the wall outlet before making any connections.

• The output sound of the player has a wide dynamic range.

Be sure to adjust the receiver’s volume to a moderate
listening level. Otherwise, the speakers may be damaged
by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the

player’s power cord. If you leave the amplifier power on,
the speakers may be damaged.

• For connection to your TV, see “Connecting to a TV”

54

.

• For details of output sound, see

40

.

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal flow

Advertising