Toshiba Strata CIX IP5000-UG-VB - Manual (Page 165)

Administrator Programming
IP5131-SDL Settings
Strata CIX IP5000-series Telephone UG 04/09
147
GRQ Port Number
1. From IP Configurations > Advanced > GRQ Port.
The current GRQ Port Number displays (shown
right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change

...or press the Cancel soft key to cancel the change
and go to the Advanced Setting screen.
Note For other notes, refer to “Station ID” on page 142 .
RRQ Port Number
1. From IP Configurations > Advanced > RRQ Port. The
current RRQ Port Number displays (shown right).
2. Enter the New number. (Maximum 5 digits).
3. Press the Set soft key to accept the change

...or press the Cancel soft key to cancel the change
and go to the Network Setting screen.
Note For other notes, refer to “Station ID” on page 142 .
Application Server Address
1. From IP Configurations > Advanced > AP Addr. The
current Application Server Addr screen displays
(shown right).
Note The Application Server Address can be an IP
Address or a URL (alphanumeric). See
“Dial Pad
Alphanumeric Characters” on page 148 to enter the
URL.
2. Follow the steps “To change settings on the screen” on
page 140 . Also see Table 21 on Page 148 for
additional information.
GRQ Port Address
0
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
RRQ Port Number
0
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New
Application Server Addr
192.168. 0. 235
Backspace = Vol-Down
[Set] [Cancel]
Config
:Current
:New