Tascam DR-07 - Manual (Page 77)

TASCAM DR-07 77
Options:
OFF
(backlight always on),
5 sec
(factory setting),
10 sec
,
15 sec
,
30 sec
Adjust the display contrast
Use
CONTRAST
to adjust the display contrast.
Options: 1–20 (factory setting: 10)
Select the type of batteries
Use
BATTERY TYPE
to select the type of
batteries. This setting is used to distinguish the
remaining minimum power required for the normal
operation or to display the batteries’ remaining
power.
Options:
ALKAL
(alkaline battery (factory
setting)),
Ni-MH
(nickel-metal hydride)
Restoring the factory settings
Use the
INITIALIZE
item to restore the various
settings of this unit to their factory settings.
1 Select
INITIALIZE
and press the ¥/π key
to highlight “
Exec
.”
2 Press the ¥/π key again to open a
confirmation pop-up window.
3 Press the ¥/π key to initialize the unit.
Press STOP/HOME to cancel initialization.
Formatting the SD card
Using
QUICK FORMAT
or
FULL FORMAT
erases all music files on the card and automatically
creates new “MUSIC” and “UTILITY” folders as
well as the “dr-1.sys” file that is necessary to use
the SD card with the DR-07.
CAUTION
When the unit is shipped new from the factory,
its SD card also has a “MANUAL” folder that
contains a PDF copy of this Owner’s Manual file.
These are erased and not restored when the
card is formatted.
13–System Settings and Formatting