Toshiba RD-XV48KE - Manual (Page 30)

30 EN
Reformatting a Disc Manually
If you are using a DVD-RW/+RW disc, you can format
the disc by performing “Format”. You can format
DVD-RW disc for either Video mode recording or VR
mode recording. DVD+RW disc can be formatted in
order to erase all content of the disc.
Note
• When you reformat the disc, the contents of the disc
are erased.
• Make sure that the recording format is set to the
desired mode. (Refer steps 1 to 6 in “Choosing the
Recording Format of a Blank DVD-RW Disc” on
page 28.)
Insert a recordable disc.
1
In stop mode, press [SETUP].
2
Select “DVD Menu” using [
U \ D],
then press [ENTER].
3
Select “Format” using [ U \ D], then
press [ENTER].
4
Select “Start” using [ U \ D], then
press [ENTER].
For DVD+RW, use [ U \ D] to select “Yes”, then
press [ENTER].
A pop up window will appear and prompt you to
confirm.
5
Select “Yes” using [
U \ D], then
press [ENTER].
e.g.) VR mode DVD-RW
Formatting will start.
If you want to cancel formatting, select “No”.
6
Formatting is complete.
Note
• It is not possible to use a disc formatted with this unit
in other DVD recorder. When you use a disc with
another DVD recorder, format a disc using that DVD
recorder.
Selecting the Sound Mode
This unit can receive bilingual broadcasts.
You can switch between modes by pressing
[AUDIO
D]. Each mode is indicated on the TV.
Refer to “Selecting the Audio Mode” on page 24.
Setting External Input Audio
When the external input audio is a bilingual
broadcast, you can choose “Stereo” or “Bilingual” to
record on an HDD/DVD. This setting is only for
recording external input (AV1/AV2/AV3).
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U \ D],
then press [ENTER].
2
Select “Recording” using [
U \ D],
then press [ENTER].
3
Select “External Input Audio” using
[
U \ D], then press [ENTER].
4
Select “Stereo” or “Bilingual” using
[
U \ D], then press [ENTER].
5
Press [SETUP] to exit.
Hint
• If you select “Stereo”:
The audio will be recorded as “stereo audio”.
• If you select “Bilingual”:
The audio will be recorded as “bilingual audio”. (See
“Setting Bilingual Recording Audio” on page 31 for
more detail.)
DVD-RW DVD-RW
Video
DVD-RW DVD-RW
VR
DVD+RW DVD+RW
Are you sure?
Yes
No
HDD HDD D DVD-R VD-RW W DVD-RW
Video
DVD-RW DVD-RW
VR
DVD-R DVD-R
D DVD+R VD+RW W DVD+RW D DVD+R VD+R DVD+R
Playback
Display
Video
Recording
Clock
Channel
DivX
HDMI
Reset All
General Setting
Auto Chapter
Recording Audio Select (XP)
Auto Finalise
Aspect Ratio (Video mode)
Bilingual Recording Audio
External Input Audio
Video Colour System
Make Recording Compatible

External Input Audio
Stereo
Bilingual
E3LG0ED_EN.book Page 30 Wednesday, April 30, 2008 11:52 AM