Toshiba 27A41 - Manual (Page 21)

19 Appendix
Using the TV
’s
Features
Setting up
your TV
Using the
Remote Control
Connecting
your TV
W
elcome to T
oshiba
Important
Safeguards
8. Repeat steps 1 through 7 to block other channels. When you are
finished blocking channels, press EXIT to return to normal
viewing.
If you try to display a blocked channel, the TV will not display it, but will
display the nearest unblocked channel.
To unblock channels:
1. Press MENU, then press or to display the OPTION menu.
2. Press
▲ or ▼ to highlight V-CHIP and then press or to
display the V-CHIP menu.
3. Use the Channel Number buttons (0-9) to enter your PIN code. If
you are accessing the V-Chip menus for the first time, choose a
four-digit number to be your PIN code. Press ENTER.
4. Press ▲ or ▼ to highlight CHANNEL BLOCK and then press or
to display the CHANNEL BLOCK menu.
5. Press or to highlight CLEAR and clear all channels from the
list of blocked channels. Press ENTER.
6. Press EXIT to return to normal viewing.
Labeling channels
Channel labels will appear over the channel number display each time
you turn on the TV, select a channel, or press the Recall button. You
can choose any four characters to identify the channels.
To create channel labels:
1. Select a channel you want to label.
2. Press MENU then press or until the OPTION menu appears.
3. Press
▲ or ▼ to highlight CH LABEL.
4. Press to display the CH LABEL menu. SET/CLEAR will be
highlighted.
5. Press or to highlight SET.
6. Press ▲ or ▼ to highlight LABEL.
Note:
After programming CHANNEL BLOCK,
change channels before turning off the
television.
Using the TV
’s
Features
PICTURE AUDIO SET UP
CH
OPTION
CH LABEL START
SELECT START
START
DVD
ENGLISH
V-CHIP
COLORSTREAM
LANGUAGE
START FAVORITE CH
PICTURE AUDIO SET UP
CH
OPTION
SET/CLEAR SET CLEAR
CH LABEL : CH 12
LABEL
END EXIT
SET ENTER SELECT
PICTURE AUDIO SET UP
CH
OPTION
SET/CLEAR SET
A
CH LABEL : CH 12
LABEL
END EXIT
SET ENTER SELECT
Menu/
Enter
Exit
Channel
Numbers
3K10601B P12-21 21/08/2001, 14:28 19