Toshiba P32LSA - Manual (Page 20)

How to install the monitor on the wall
In case of using option bracket (FPT-WA5)
1. Remove the stand of the LCD monitor
To avoid damage, spread blanket on the table to put the LCD
monitor on.
To remove the stand of the LCD monitor, put the LCD
monitor on the edge of the table, and remove the screws on the
stand.
Described below is one example of how to install the unit on
the wall. The wall hanging accessory will need to be
manufactured according to the installation, so consult your
dealer before the installation work.
2. Wall hanging accessory
Wall hanging accessory is available at the shop.
*: In the package, the bracket and the frame of wall hanging
accessory are assembled. Please separate the bracket and the frame
at first. After the bracket is fixed on the wall, fix the frame on the
LCD monitor.
3. Remove the frame from the bracket
Hold the lower part of the frame and raise it up to remove from the
bracket.
4. Fix the bracket on the wall
Fix the bracket on the wall firmly with anchors or screws (not
supplied).
Make sure anchors or screws are stable.
(Choose appropriate anchors or screws depending on the
structure and material of the wall.)
Refer to the chart on page 19 to check the condition of the
wall, and choose the safe and appropriate way for installation.
20