Topcom BPM WRIST 2300 - Manual (Page 12)

12
TOPCOM BPM WRIST 2300
12 MEMORY
• Press M1 to recall values from Memory Zone 1.
• Press M2 to recall values from Memory Zone 2.
All stored measurements will be assigned distinct numbers, identifying the
sequence in which the values are stored. The last measurement will be shown
first. Every new press of the Recall Key calls for one prior value stored.
When the batteries are installed, the data in the memories will not
be lost even when the Blood Pressure Monitor is switched off.
Remove the batteries for more than 10 seconds to erase the
memories.
M1
M2