Taylor BC10 - Manual (Page 6)

2 Models BC10/BW11 To the Operator
050819
Section 2 To the Operator
The mixer you have purchased has been carefully
engineered and manufactured to give you dependable
operation. Mixing various candies, cookies, fruits,
nuts, liquid flavors, and other food items into ice cream
or frozen yogurt has made unlimited flavor
combinations and product textures available.
The development of counter and wall mount mixers
have made this unlimited resource available to even
very small retail outlets and to those facilities where
counter space is limited.
The mixer, when properly operated and cared for, will
produce a consistent, quality product. Like all
mechanical products, it will require cleaning and
maintenance. A minimum amount of care and
attention is necessary if the operating procedures
outlined in this manual are followed closely.
This Operator’s Manual should be read before
operating or performing any maintenance on your
equipment.
In the event that you should require technical
assistance, please contact your local authorized
Taylor Distributor.
NSF approvals of the Models BC10 and BW11 were
obtained by the Vita--Mix Corporation, 8615 Usher
Road, Cleveland, Ohio 44138.
If the crossed out wheeled bin symbol is
affixed to this product, it signifies that this product is
compliant with the EU Directive as well as other similar
legislation in effect after August 13, 2005. Therefore,
it must be collected separately after its use is
completed, and cannot be disposed as unsorted
municipal waste.
The user is responsible for returning the product to the
appropriate collection facility, as specified by your local
code.
For additional information regarding applicable local
laws, please contact the municipal facility and/or local
distributor.
Warranty on Taylor Blenders
Caution: This warranty is valid only if required
exchanges are provided by an authorized Taylor
Distributor.
Warranty Terms
This warranty covers only defects in material and
workmanship under normal use and service. The
Taylor Distributor will replace those components
that become defective as follows:
S Five years from date of installation for
the blender.
S One year from date of installation for the
product dispensers.
Not included are the following items:
S Labor, transportation charges, and sales
or use taxes associated with the
removal and return of the defective part
and the installation of the replacement
part.
S External power cords, and electrical
grounding.
S Wear items: agitator shaft, splash
shield, and foot pedal.
S Replacements required because of
operator misuse as defined below, fire
or other casualty, normal wear or
deterioration.
Misuse includes the owner’s failure to handle
parts properly, resulting in breakage. Misuse is
also defined as allowing unauthorized service
agents to attempt repair on units.
For validation of warranty, this unit must be
registered at the Taylor Company within thirty (30)
days of installation.