Toshiba D-R2SU - Manual (Page 18)

18
Connecting to a satellite system
Choose one of the following according to your type of satellite receiver.
Connections
When the satellite receiver does not have audio/
video outputs
1 Connect a satellite antenna to the satellite receiver.
2 Connect the RF IN (FROM ANT.) terminal on the
recorder and the RF OUT terminal of the satellite
receiver.
3 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set “Cable Box/DBS” of “Set Top Box setting” to
“C.Box”. page 37
• set “Select Input” of “Set Top Box setting”to “3CH” or
“4CH”. page 37
You can control satellite channels from the recorder.
Preform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder. page 19
2) Set “IR control” of “Set Top Box setting” to “On”.
page 37
When the satellite system has audio/video outputs
1 Connect a satellite antenna to the satellite system.
2 Connect the INPUT1 or INPUT3 (VIDEO/L/R) jacks on
the recorder and the audio/video output jacks of the
satellite system.
3 Connect the OUTPUT1 (VIDEO/L/R) jacks on the
recorder and the audio/video input jacks of the TV.
4 Connect the RF OUT (TO TV) terminal on the recorder
and the antenna input connector of the TV.
You will need to:
• set “Cable Box/DBS” of “Set Top Box setting” to
“C.Box”. page 37
• set “Select Input” of “Set Top Box setting” to “Line1”.
page 37
You can control satellite channels from the recorder.
Preform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder. page 19
2) Set “IR control” of “Set Top Box setting” to “On”.
page 37
Satellite receiver
Satellite antenna
Satellite
receiver
Satellite antenna
Video output
IN OUT
IN
Audio outputs
VHF / UHF VIDEO L R
R L VIDEO
S-VIDEO
S-VID
IN
IN
RF OUT
(TO TV)
RF IN
(FROM ANT.)
IR
CHANNEL
CHANGE
3CH
4CH
P B
VIDEO L R VIDEO R L
R L VIDEO
S-VIDEO S-VIDEO
S-VIDEO Y P R
COMPONENT OUTPUT
OUTPUT INPUT3
INPUT1
IR
DIGITAL AUDIO OUTPUT
BITSTREAM/PCM
OPTICAL
CHANNEL
CHANGE