Technicolor - Thomson Spectra SC 63 TH - Manual (Page 11)

Sound Sound 1 Sound 2
Select the Format line (green key).
Select 4/3 or 16/9 depending on the picture format.
The format can also be selected automatically when the
source is one of the two Euro-AV sockets AV1 or AV2.
In this case, select AUTO which is only displayed for
sources AV1 and AV2.
The format is stored in memory for AV1, AV2 and AV3.
Remove the menu from the screen.
television set
picture adjustments
11
Zoom Off Zoom 1 Zoom 2
Format 4/3 16/9 Auto
Picture lift Down (-) Up(+)
- +
TV
Format
Zoom Off Zoom 1 Zoom 2
Format 4/3 16/9 Auto
PICTURE FORMAT
Off
Press the red key.
The Sound menu is displayed, LOUDSPEAKERS is selected.
If this is not the case, select the Contents line with
the red key and LOUDSPEAKERS with .
Select the Sound line (red key).
This varies depending on the sound type received:
SOUND MONO/STEREO/NICAM *
SOUND DUAL (2 languages)
SOUND NICAM 3 *
SOUND AV
Select the required sound for the loudspeakers.
AUTO/STEREO position enables you obtain MONO sound for
mono broadcasts and STEREO for stereo broadcasts.
*Nicam is a digital sound transmission system, it enables you to receive broadcasts
in high quality STEREO or DUAL SOUND. Analogue MONO sound is transmitted
simultaneously (MONO in NICAM STEREO or SOUND 3 in NICAM 3).
Select the Effect line (red key).
Select :
Normal = normal sound
Wide = stereo-effect sound for mono broadcasts
wide stereo sound for stereo broadcasts.
television set
sound adjustments
Sound Auto/Stereo Mono
Sound Sound 1 Sound 2 Sound 3
Sound Stereo Sound 1 Sound 2
- +
- +
- + Sound Auto/Stereo Mono
Effect Normal Wide
Balance
Bass
Treble
Effect
LOUDSPEAKERS
Sound Auto/Stereo Mono
Effect Normal Wide
Balance
Bass
Treble
LOUDSPEAKERS HEADPHONES AV
Sound Auto/Stereo Mono
Effect Normal Wide
Balance
Bass
Treble
LOUDSPEAKERS HEADPHONES AV
GB
C10) 2 ZO DM NIC GB 18/06/96 11:05 Page 11