Cable specifications, Fiber cable, Continued fiber cable – Transition Networks SSDTF1029-106 User Manual
Page 6: Copper cable
10
SSDTF10xx-10x
Cable Specifications
Fiber cable
Single mode fiber (recommended):
9 µm
Multimode fiber (recommended):
62.5/125 µm
Multimode fiber (optional):
100/140, 85/140, 50/125 µm
SSDTF1011-105
850 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -32.5 dBm
max: -14.0 dBm
Link Budget:
13.5 dB
SSDTF1012-105
1310 nm single mode
Fiber-optic Transmitter Power:
min: -27.0 dBm
max: -10.0 dBm
Fiber-optic Receiver Sensitivity:
min: -34.0 dBm
max: -14.0 dBm
Link Budget:
7.0 dB
SSDTF1013-105
850 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber Optic Receiver Sensitivity:
min: -32.5 dBm
max: -14.0 dBm
Link Budget:
13.5 dB
SSDTF1014-105
1310 nm single mode
Fiber-optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -34.0 dBm
max: -3.0 dBm
Link Budget:
15.0 dB
SSDTF1015-105
1310 nm single mode
Fiber Optic Transmitter Power:
min: -8.0 dBm
max: -2.0 dBm
Fiber Optic Receiver Sensitivity:
min: -38.0 dBm
max: -8.0 dBm
Link Budget:
30.0 dB
SSDTF1016-105
1310 nm single mode
Fiber-optic Transmitter Power:
min: -5.0 dBm
max: 0.0 dBm
Fiber-optic Receiver Sensitivity:
min: -38.0 dBm
max: -8.0 dBm
Link Budget:
33.0 dB
SSDTF1017-105
1550 nm single mode
Fiber-optic Transmitter Power:
min: -5.0 dBm
max: 0.0 dBm
Fiber-optic Receiver Sensitivity:
min: -34.0 dBm
max: -7.0 dBm
Link Budget:
29.0 dB
SSDTF1018-105
1300 nm multimode
Fiber-optic Transmitter Power:
min: -19.0 dBm
max: -14.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.5 dBm
max: -14.0 dBm
Link Budget:
14.5 dB
SSDTF1022-105
1310 nm single mode
Fiber Optic Transmitter Power:
min: -15.0 dBm
max: -5.0 dBm
Fiber Optic Receiver Sensitivity:
min: -25.0 dBm
max: -14.0 dBm
Link Budget:
10.0 dB
SSDTF1025-105
1310 nm single mode
Fiber-optic Transmitter Power:
min: -11.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -20.0 dBm
max: -3.0 dBm
Link Budget:
9.0 dB
11
Cable Specifications
-- Continued
Fiber cable
SSDTF1027-105
1300 nm multimode
Fiber Optic Transmitter Power:
min: -19.0 dBm
max: -10.0 dBm
Fiber Optic Receiver Sensitivity:
min: -32.5 dBm
max: -14.0 dBm
Link Budget:
13.5 dB
SSDTF1029-105
1310 nm (TX)/1550 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
SSDTF1029-106
1550 nm (TX)/1310 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -13.0 dBm
max: -6.0 dBm
Fiber-optic Receiver Sensitivity:
min: -32.0 dBm
max: -3.0 dBm
Link Budget:
19.0 dB
SSDTF1029-107
1310 nm (TX)/1550 nm (RX) simplex
SSDTF1029-108
1550 nm (TX)/1310 nm (RX) simplex
Fiber-optic Transmitter Power:
min: -8.0 dBm
max: -3.0 dBm
Fiber-optic Receiver Sensitivity:
min: -33.0 dBm
max: -3.0 dBm
Link Budget:
25.0 dB
The fiber optic transmitters on this device meet Class I Laser safety requirements
per IEC-825/CDRH standards and comply with 21 CFR1040.10 and
21CFR1040.11.
Copper cable
Connector:
RJ-45 / RJ-48C
Elec. network connection:
Single 4-wire (Tip/Ring - Tip1/Ring1)
Mechanical arrangement:
8-position miniature modular jack
Usage:
1.544 Mb/s or 2.0478 Mb/s access lines
Interface codes:
04DU9 (any applicable)
Cable type:
Long Haul T1:
0db, -7.5dp, -15db, -22db
E1 (120 ohm):
E1 3.0V, 120
J1 (110 ohm):
0-655’, 110
DSX-1 (100 ohm):
0-133’, 133-266’, 266-399’, 399-533’, 533-655’
1
2
3
4
5
6
7
8
1
2
3
4
5
6
7
8
R
T
Dry Contact B
Transmit
R1
T1
Dry Contact A
Receive
(ring) R
(tip) T
(ring) R1
(tip) T1
(not used)