Thermador Thermador - Manual (Page 5)

Page 5
CLEANING
INSTRUCTIONS
Be sure lights are cool
before cleaning the hood.
To Clean Filter/s
• It is recommended that the
filters be washed at least once a
month; they can be washed by
hand or in the dishwasher.
• Drain water through holes and
along filter edges and allow to
dry thoroughly before replacing
it.
To Clean Hood Surface
• For general care, wipe the
outside of the stainless steel,
white, black or glass hood with
sudsy water or household
cleaners such as Fantastic
®
or
Formula 409
®
, rinse well and dry
with clean soft cloth to avoid
water marks.
• Wipe and dry brushed stainless
steel in the same direction as the
grain.
• Do not use abrasive products.
• To remove finger prints and give
added shine use spray cleaners
such as Stainless Steel Magic
®
and Shimmer
®
FILTERS
The metal grease filters are made of
anodized aluminum and are long
lasting.
To Remove The Metal Grease
Filter/s
• Turn blower and lights off.
For Models HNI, HTNI
• Push each handle in the
direction of the arrows as shown
in Fig. 2.
To Replace The Metal Grease
Filter/s
• Reverse procedure.
Fig. 2