Electrolux ECG6600 User Manual

Page 135

Advertising
background image

g

135

shows a progress bar and percentage
«

100%».

After a few seconds the display just
shows «FILL TANK !»

0 Empty the rinsing water out of the

container.

0 Take out the water tank, fill it with

clean water and put it back in place.
The appliance is now ready for use
again and is back to the last coffee
mode selected.

3

We recommend throwing the first cup
of coffee away after the descaling
programme.

15

What to do when the
display show the following
messages...

«FILL TANK»

• The water tank is empty or not prop-

erly in place.

0 Fill the water tank and insert it accord-

ing to instructions, see „Filling with
water“ page 118.

• The water tank is dirty or limescale

deposits have built up inside it.

0 Rinse out or descale the water tank.

«GROUND COFFEE TOO FINE

SET GRIND LEVEL

+ PRESS HOT WATER KEY»

• The coffee machine cannot make any

coffee.

0 Place a container underneath the hot

water nozzle and press the "hot
water" button (Figure 32).

• Coffee comes out too slowly.

0 Turn the knob for the grind level set-

ting (Figure 12) clockwise by one posi-
tion (see „Setting the grind level“
page 126).

«EMPTY WASTE COFFEE

CONTAINER»

• The waste coffee container is full.

0 Empty, clean and replace the waste cof-

fee container as described in „Emptying
the waste coffee container“ page 132.

«INSERT WASTE COFFEE

CONTAINER»

• The waste coffee container was not

replaced after cleaning.

0 Open service door and insert the waste

coffee container.

«ADD PRE-GROUND

COFFEE»

• No ground coffee was put into the fill-

ing chute after selecting the preground
coffee function.

0 Add ground coffee as described under

„Makingcoffee with ground coffee“
page 123.

«FILL BEAN CONTAINER »

• There are no more coffee beans in the

coffee bean container.

0 Fill coffee bean container, see „Filling

the coffee bean container“ page 118

• If the mill mechanism starts sounding

very loud, this can mean that a small
stone from the coffee beans has
blocked the mill mechanism.

0 Consult customer services. Blocking or

damage caused by foreign objects in
the grinder might be excluded from
the guarantee.

«PLEASE DESCALE !»

• Shows that the coffee machine is

encrusted with limescale.

0 The descaling programme described in

Chapter „Carrying out the descaling
programme“ page 133 must be carried
out as soon as possible.

«CLOSE DOOR»

• The service door is open.

0 Close the service door. If the service door

cannot be closed, make sure that the
brewing unit is correctly inserted (see
„Cleaning the brewing unit“ page 132)

822_949_354 ECG6600-East_Elux.book Seite 135 Freitag, 1. Februar 2008 11:36 23

Advertising